Vintage Dome (Metal) Old Brass - Dark Oak Intermediate Light Switch
This product is not currently available
Socket and Switch Sizes - Single 95mm x 95mm, Twin 156mm x 95mm
Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.
Notes
All light switches are rated at 10A
All wooden pattresses are hand waxed for subtle sheen.
Dimensions - 1 Gang Square - 90mm x 90mm, 1 Gang Round - Diameter 110mm
Each Individual Switch - 66mm Diameter
Full Instructions Included
What is a Intermediate Light Switch?
Intermediate Switches are also known as 3 way Switches. Intermediate Switches are typically used on a circuit that requires you to switch a lighting point from more than 2 positions ie On the Stairs and landings in a 3 story house where you would have a switch on the ground floor then also switches on the 2 upper floors that all control the same lighting point.
You would then require 2 x 2 way switches and 1 x intermediate switch to control this circuit.
Intermediate switches are generally only available as a single switch (One Gang) however we also sell multiple combinations of Intermediates and 2 way switches that you can find on our shopping menu where available.
Our light switches have a load rating of either 10amp or 20amp and the 4 terminals found on the back of the intermediate switch will accept up to
3 x 1.5mm Twin & Earth Cables.
We recommend 16mm deep wall boxes for mounting our switches or 25mm deep wall boxes for shallow or flat plate Switches.
If you require any advice or assistance please call our sales team on 01926 289 289.
Wiring Diagram
See the wiring diagrams for Intermediate Switches.
