Heritage Flat Time Aged Brass Time Lag Staircase Switch


Heritage Flat Time Aged Brass Time Lag Staircase Switch

Socket and Switch Sizes - Single 88mm x 88mm, Twin 148mm x 88mm

Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.

Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.
Retrofit Time Lag Switch - Illuminated : White Trim Heritage Flat Time Aged Brass Time Lag Staircase Switch
Retrofit Time Lag Switch - Illuminated : White Trim
Item Code: S86055
£66.89 
£80.27
Retrofit Time Lag Switch - Non Illuminated : White Trim Heritage Flat Time Aged Brass Time Lag Staircase Switch
Retrofit Time Lag Switch - Non Illuminated : White Trim
Item Code: S86054
£65.69 
£78.83


Notes

Time aged brass is an unlacquered finish buffed with a layer of beeswax. The sockets and switches will continue age slowly over time.


What is a Time Lag Staircase Switch?

Staircase Time Lag Switches are designed for use in common areas where you might have multiple switching positions on a common lighting circuit where a temporary use of light is required. These are most commonly used to switch lights on in a stairwell and the beauty of this is that they will switch themselves off after a pre-set time.

Previously Staircase Time Lag switches have only been available as air-operated push buttons and as they were only available in a plain white finish with an unsightly large white button plunger they were found to be unsuitable for many properties where something more stylish was a requirement.

When using any version of Time Lag Staircase switch you cannot use standard on/off light switches on the same circuit - all the other switches for the lights will need to be the same Time Lag Switches.

At Sockets and Switches we have two versions of the Time Lag Switch - Retrofit and Module.


Retrofit Time Lag Switches

We have introduced a Retrofit Staircase Time Lag Switch to our range. These decorative switches simply replace the old White air-operated push button type.

For simplicity of installation the Retrofit Time Lag models do not require a neutral and as such can be used as a straight replacement for your existing light switch.

The switch has a fully adjustable time delay from 1 minute up to 2 hours, to alter the delay you simple adjust the setting on the rear of the switch when installing. On use the user presses the push button on the switch to briefly switch the lights ON and then after your pre-set time has elapsed, the lights will switch OFF automatically.

You have a choice of a standard button switch or an illuminated version with a location light which remains lit until the switch is pressed to help find the switch in the dark. When pressed the location light goes off as the lights come on; once the time lag period has elapsed the location light then comes back on.

Important - never use a Retrofit Time Lag Staircase Switch that is not rated higher than the load applied to it – the maximum loads for the Retrofit switches are 1500w (240v) or 1000w (Fluorescent) or 500w (LED). The switches can also be used for Fans or Halide Lights up to 250w.

We recommend a 35mm deep wall box as these switches are approximately 29mm deep.


Module Switches - only available in certain styles

This version of the Time Lag Switch requires a module to be fitted into the circuit to work. You will require only one Staircase Time Lag Module per circuit and are usually located remotely and out of sight. This means you can have fully deccorative switches where the light is required and any number on the circuit and can be combine Staircase Time Lag Switches with Toggle Light Switches on the same plate if required.

The module has a fully adjustable time delay setting from 30 seconds up to 10 minutes that is pre-set on installation – this then enables the users to press the push button Staircase Time Lag Switch briefly to switch ON the lights then after the pre-set time has elapsed the lights will switch OFF automatically.

Important - never use a Staircase Time Lag Module that is not rated higher than the total load applied to it – the maximum loads for the module are 2300w (240v) or 1500w (12v) or 1000w (Fluorescent) or 460w (LED).

We recommend 25mm or 35mm deep wall boxes for mounting our button dimmer switches.

If you require any advice or assistance please call our sales team on 01926 289 289.



Customer Reviews For Heritage Flat Time Aged Brass Time Lag Staircase Switch


No reviews yet - Be the first to Rate the Heritage Flat Time Aged Brass Time Lag Staircase Switch

Other reviews for Heritage Flat Sockets & Switches are

Average customer rating: Product Rating 10 out of 55 stars  10  reviews

Product Rating 5 out of 5      Time Aged Brass
26 September 2024 by , Knightsbridge - Verified Customer

Look great look like theyve been in place for decades so very authentic. Quality is top class.


Product Rating 5 out of 5      Classic Style
06 April 2021 by , London - Verified Customer

A classic look with the green and brass. Fits perfectly into our restored Victorian house. Thank you.


Product Rating 5 out of 5      Copper But Not Bright
03 April 2021 by , Hampshire - Verified Customer

Wanted copper but not the normal bright polished copper. Looked at other coppers like natural and hammered but decided on this look as more subtle but not worn.


Product Rating 5 out of 5      Suits The Kitchen Perfectly
21 March 2021 by , Oxford - Verified Customer

This copper finish goes really well in our kitchen, Shame we haven't found these before.


Product Rating 5 out of 5      Gorgeous Colour
02 February 2021 by , Winchester - Verified Customer

The colour and contrast of the green with the brass is just fab. Looks super in our redecorated dining room.


Product Rating 5 out of 5      
23 October 2020 by , London - Verified Customer


Product Rating 5 out of 5      Unique
18 May 2020 by , London - Verified Customer

Beautifully finished in Sage Green to the highest standard - Im impressed so was my electrician.


Product Rating 5 out of 5      Very High Quality Items
10 June 2019 by , Wigan - Verified Customer

Very pleased with my purchase. These are very high quality items and they look so good on my walls.


Product Rating 5 out of 5      Very Good Products
22 May 2019 by , London - Verified Customer

The best Ive ever fitted. Top quality


Product Rating 5 out of 5      Stunning Finish
15 March 2019 by , Stratford Upon Avon - Verified Customer

Well made and well finished to a very high quality. Worth the investment. I recommend.




Review Heritage Flat Time Aged Brass Time Lag Staircase Switch

Please enter your review for the Heritage Flat Time Aged Brass Time Lag Staircase Switch here

 Rating:
Please rate the product - 5 excellent to 1 not so good.
 

Review Title:

Your review

 

Name:

Email:

Location:


(Please enter village, town, area or city only - no postcodes please)

Thank you.   





Time Lag Staircase Switches are available in the following styles -

Antique Edge ,   Art Deco ,   Art Deco Classic ,   Art Deco Dual ,   Art Deco Screwless ,   Art Deco Supreme ,   Black ,   Burnished Flat ,   Classic ,   Classical ,   Classical Aged ,   Contemporary Screwless ,   Crystal Clear ,   Dorchester ,   Duo ,   Duo Premier ,   Duo Premier Plus ,   Edwardian Classic ,   Edwardian Elite ,   Edwardian Premier Plus ,   Elegance ,   Elegance Elite ,   Elite Flat ,   Elite Paintable ,   Elite Square Paintable ,   Executive ,   Executive Square ,   Farrow & Ball Colour Match ,   Flat ,   Flat Classic ,   Flat Matt ,   Flat Vintage ,   Flat Wood Veneer ,   Flatplate Supreme ,   Georgian ,   Georgian Flat ,   Georgian Premier ,   Georgian Premier Plus ,   Grandura ,   Hand Forged ,   Heritage Flat ,   Low Profile ,   Low Profile Rounded ,   Natural Elements ,   Palladian ,   Regency Premier Plus ,   Regent ,   Screwless Aged ,   Screwless Paintable ,   Screwless Square ,   Screwless Supreme ,   Seamless ,   Seamless Colour Match ,   Seamless Square ,   Ultra Square ,   Victorian ,   Victorian Premier ,   Victorian Premier Plus ,   Vogue & Warwick

© 2024 Sockets And Switches
Sockets & Switches, Unit A5, Quarry Park, Old Milverton Lane, Leamington Spa, Warwickshire, CV32 6RW  |  [email protected]