Lightwave Black Friday Sale

Socket and Switch Sizes - Single 88mm x 88mm, Twin 148mm x 88mm

Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.

Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.

10 Metre PIR Switch : White Trim
Item Code: S86051

£95.19 

£114.23

5 Metre PIR Switch : White Trim
Item Code: S86050

£92.67 

£111.20

Add To The Basket

Notes

Time aged brass is an unlacquered finish buffed with a layer of beeswax. The sockets and switches will continue age slowly over time.

What is a PIR Switch?

Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range.

PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time.

Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement.

They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load.

They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials.

You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral.

Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED).

They will also switch on/off Fans to the maximum load of 250w.

We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches.

If you require any advice or assistance please call our sales team on 01926 289 289.

Customer Reviews For Heritage Flat Time Aged Brass PIR Switch

No reviews yet - Be the first to Rate the Heritage Flat Time Aged Brass PIR Switch

Other reviews for Heritage Flat Sockets & Switches are

Average customer rating: 5 stars  10  reviews

      Time Aged Brass
26 September 2024 by Farooq Ahmedi, Knightsbridge - Verified Customer

Look great look like theyve been in place for decades so very authentic. Quality is top class.

      Classic Style
06 April 2021 by Henri, London - Verified Customer

A classic look with the green and brass. Fits perfectly into our restored Victorian house. Thank you.

      Copper But Not Bright
03 April 2021 by Caroline, Hampshire - Verified Customer

Wanted copper but not the normal bright polished copper. Looked at other coppers like natural and hammered but decided on this look as more subtle but not worn.

      Suits The Kitchen Perfectly
21 March 2021 by Emily, Oxford - Verified Customer

This copper finish goes really well in our kitchen, Shame we haven't found these before.

      Gorgeous Colour
02 February 2021 by Phoebe, Winchester - Verified Customer

The colour and contrast of the green with the brass is just fab. Looks super in our redecorated dining room.

      
23 October 2020 by Nikki Ali, London - Verified Customer

      Unique
18 May 2020 by Felicity Goodhead, London - Verified Customer

Beautifully finished in Sage Green to the highest standard - Im impressed so was my electrician.

      Very High Quality Items
10 June 2019 by Laura Foster Designs, Wigan - Verified Customer

Very pleased with my purchase. These are very high quality items and they look so good on my walls.

      Very Good Products
22 May 2019 by Bond Electrical, London - Verified Customer

The best Ive ever fitted. Top quality

      Stunning Finish
15 March 2019 by Harrison Howkens, Stratford Upon Avon - Verified Customer

Well made and well finished to a very high quality. Worth the investment. I recommend.