Heritage Flat Time Aged Brass LED Dimmer

Socket and Switch Sizes - Single 88mm x 88mm, Twin 148mm x 88mm

Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.

Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.

1 Gang 250W 2 Way LED Dimmer
Item Code: S86033

£49.00 

£58.80

2 Gang 250W 2 Way LED Dimmer
Item Code: S86034

£75.00 

£90.00

3 Gang 400W 2 Way LED Dimmer
Item Code: S86035

£101.00 

£121.20

4 Gang 400W 2 Way LED Dimmer
Item Code: S86036

£126.00 

£151.20

Add To The Basket

Notes

Time aged brass is an unlacquered finish buffed with a layer of beeswax. The sockets and switches will continue age slowly over time.

See How To Program The Varilight V-Pro Dimmer.

What is a LED Dimmer?

Our LED Dimmers are specifically designed to operate on ALL types of DIMMABLE LED lamps and strips. These LED dimmers can be easily programmed to optimise LED performance by following the instructions provided with this product. The dimmers have a choice of modes to match your LEDs and the minimum brightness can changed to suit your room.

Important - non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattages and are very energy efficient. This can cause problems when choosing the correct dimmer.

If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.

Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur.

On special request we can make up combined dimmers that incorporate LED dimmers and Intelligent dimmers on the same plate if required.

We recommend 25mm deep wall boxes for mounting our LED dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges.

If you require any advice or assistance please call our sales team on 01926 289 289.

Customer Reviews For Heritage Flat Time Aged Brass LED Dimmer

No reviews yet - Be the first to Rate the Heritage Flat Time Aged Brass LED Dimmer

Other reviews for Heritage Flat Sockets & Switches are

Average customer rating: 5 stars  10  reviews

      Time Aged Brass
26 September 2024 by Farooq Ahmedi, Knightsbridge - Verified Customer

Look great look like theyve been in place for decades so very authentic. Quality is top class.

      Classic Style
06 April 2021 by Henri, London - Verified Customer

A classic look with the green and brass. Fits perfectly into our restored Victorian house. Thank you.

      Copper But Not Bright
03 April 2021 by Caroline, Hampshire - Verified Customer

Wanted copper but not the normal bright polished copper. Looked at other coppers like natural and hammered but decided on this look as more subtle but not worn.

      Suits The Kitchen Perfectly
21 March 2021 by Emily, Oxford - Verified Customer

This copper finish goes really well in our kitchen, Shame we haven't found these before.

      Gorgeous Colour
02 February 2021 by Phoebe, Winchester - Verified Customer

The colour and contrast of the green with the brass is just fab. Looks super in our redecorated dining room.

      
23 October 2020 by Nikki Ali, London - Verified Customer

      Unique
18 May 2020 by Felicity Goodhead, London - Verified Customer

Beautifully finished in Sage Green to the highest standard - Im impressed so was my electrician.

      Very High Quality Items
10 June 2019 by Laura Foster Designs, Wigan - Verified Customer

Very pleased with my purchase. These are very high quality items and they look so good on my walls.

      Very Good Products
22 May 2019 by Bond Electrical, London - Verified Customer

The best Ive ever fitted. Top quality

      Stunning Finish
15 March 2019 by Harrison Howkens, Stratford Upon Avon - Verified Customer

Well made and well finished to a very high quality. Worth the investment. I recommend.