Recessed Floor Box Sale   Save 10% On Recessed Floor Boxes

Edwardian Classic Bronze Dimmer and Toggle Switch Combination


Edwardian Classic Bronze Dimmer and Toggle Switch Combination

Socket and Switch Sizes - Single 86mm x 86mm, Twin 147mm x 86mm

These sockets and switches have an expected standard delivery time of between 7 to 10 working days.

Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.
2 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 1 x  2 Way Toggle Switch Edwardian Classic Bronze Dimmer and Toggle Switch Combination
2 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 1 x 2 Way Toggle Switch
Item Code: S83820
£106.90 
£128.28
3 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 2 x  2 Way Toggle Switch  Edwardian Classic Bronze Dimmer and Toggle Switch Combination
3 Gang Combination : 1 x 400w 2 Way Dimmer Switch + 2 x 2 Way Toggle Switch
Item Code: S83821
£131.47 
£157.76
3 Gang Combination : 2 x 400w 2 Way Dimmer Switch + 1 x  2 Way Toggle Switch  Edwardian Classic Bronze Dimmer and Toggle Switch Combination
3 Gang Combination : 2 x 400w 2 Way Dimmer Switch + 1 x 2 Way Toggle Switch
Item Code: S83822
£167.85 
£201.42


What is a Dimmer and Toggle Switch Combination?

Toggle Light Switches and Dimmer Switches are generally available to switch 1 way and/or 2 way circuits. All of our Toggle Switches and Dimmers are 2 way versions and the beauty of this is that they can be used on both 1 way and 2 way circuits thus eliminating the need to buy both types. A 2 way circuit refers to a lighting point that can be switched from 2 different places i.e. Hall and Landing, where you might have a switch at the bottom of the stairs and a further switch at the top of the stairs that both control the same lighting point.

If you should have more than 2 switching positions you will require one of the switches to be an intermediate switch.

Our intelligent Dimmer range takes some of the mystery out of choosing the correct dimmer. These leading edge intelligent dimmers will adapt to the type of load put through them. This means that they will operate standard incandescent lamps as well as mains halogen lamps and low voltage halogen lamps. If you require LED lamps to be dimmed please refer to our LED Dimmer section below– these can be supplied in combination with Toggle Switches by request.

Our toggle light switches and dimmer combinations are available from a double switch (Two Gang) up to 3 switches (Three Gang). The word “gang” refers to the rocker switch or dimmer– for example if you require a triple light switch it would be 3 Gang.

Larger versions of this combination range are available by request.

Our toggle light switches have a load rating of either 10amp or 20amp and the terminals will accept up to 3 x 1.5mm Twin & Earth Cables on both the switches and the dimmers.

Our Dimmer Switches are rated by wattage. They are commonly available in 250w, 400w, 600w and 1000w modules. It is important to note that they also have a minimum load requirement of 25w, 40w, 100w and 150w respectively.

Led Dimmers

Our LED Dimmers are specifically designed to operate on ALL types of DIMMABLE LED lamps and strips. These trailing edge dimmers can be easily set to run on leading edge mode by following the instructions provided with this product. This versatility means that these LED dimmers can almost dim anything from ordinary incandescent light bulbs through to halogen bulbs as well as LED.

Non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.

Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattages and are very energy efficient. This can cause problems when choosing the correct dimmer.

If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.

Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.

Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur.

On special request we can make up combined dimmers that incorporate LED dimmers and intelligent dimmers on the same plate if required.

We recommend 25mm deep wall boxes for mounting our Dimmer and Toggle Light Switch Combinations or 35mm deep wall boxes for shallow or flat plate versions.

If you require any advice or assistance please call our sales team on

If you require any advice or assistance please call our sales team on 01926 289 289.



Customer Reviews For Edwardian Classic Bronze Dimmer and Toggle Switch Combination


No reviews yet - Be the first to Rate the Edwardian Classic Bronze Dimmer and Toggle Switch Combination

Other reviews for Edwardian Classic Sockets & Switches are

Average customer rating: Product Rating 7 out of 55 stars  7  reviews

Product Rating 5 out of 5      Matches My Old Switches Perfectly
20 August 2020 by , Wembley - Verified Customer

Looking for something to match my 25 year old switches and these are dead on.


Product Rating 5 out of 5      Straightforward
03 June 2020 by , Stourbridge - Verified Customer

Simple and straightforward design. Square with no fussy bits and pieces.


Product Rating 5 out of 5      They Fit My Existing Shallow Boxes - Perfect
24 April 2020 by , Hounslow - Verified Customer

I tried loads of different ones from other places and none fitted my existing 25mm in the wall boxes. This purchase fitted eaisly and look great. Dont know why more retailers dont do things like this as it must be a problem for most normal houses? Im so glad I found this company and the sockets look very good too.


Product Rating 5 out of 5      Finish the room off nicely
04 July 2019 by , Marlow - Verified Customer

Very pleased with these switches. Match the house perfectly.


Product Rating 5 out of 5      Well Pleased
04 July 2019 by , Swansea - Verified Customer

Great purchase & well pleased. High quality and fast delivery. Cant fault them.


Product Rating 5 out of 5      Very Smart Switches
16 May 2019 by , London - Verified Customer

Plain and unfussy style and very well made switches.


Product Rating 5 out of 5      Classic Style
01 March 2019 by , York - Verified Customer

These were good value and I was surprised how heavy and well made these are for the price paid. I will be returning for more.




Review Edwardian Classic Bronze Dimmer and Toggle Switch Combination

Please enter your review for the Edwardian Classic Bronze Dimmer and Toggle Switch Combination here

 Rating:
Please rate the product - 5 excellent to 1 not so good.
 

Review Title:

Your review

 

Name:

Email:

Location:


(Please enter village, town, area or city only - no postcodes please)

Thank you.   





Dimmer and Toggle Switche Combinations are available in the following styles -

Art Deco Dual ,   Contemporary Screwless ,   Dorchester ,   Duo Premier ,   Duo Premier Plus ,   Edwardian Classic ,   Edwardian Elite ,   Edwardian Premier Plus ,   Elegance Elite ,   Elite Flat ,   Elite Paintable ,   Elite Square Paintable ,   Flatplate Supreme ,   Georgian Premier Plus ,   Low Profile ,   Low Profile Rounded ,   Palladian ,   Regency Premier Plus ,   Screwless Aged ,   Screwless Paintable ,   Screwless Square ,   Screwless Supreme ,   Victorian Premier & Victorian Premier Plus

© 2024 Sockets And Switches
Sockets & Switches, Unit A5, Quarry Park, Old Milverton Lane, Leamington Spa, Warwickshire, CV32 6RW  |  [email protected]