Lightwave Black Friday Sale

View a larger video of the Hand Forged Hammered Black range

Socket and Switch Sizes - Single 88mm x 88mm, Twin 148mm x 88mm

Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.

Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.

Retrofit Time Lag Switch - Illuminated : White Trim
Item Code: S77425

£72.28 

£86.73

Retrofit Time Lag Switch - Non Illuminated : White Trim
Item Code: S77424

£70.79 

£84.95

Add To The Basket

What is a Time Lag Staircase Switch?

Staircase Time Lag Switches are designed for use in common areas where you might have multiple switching positions on a common lighting circuit where a temporary use of light is required. These are most commonly used to switch lights on in a stairwell and the beauty of this is that they will switch themselves off after a pre-set time.

Previously Staircase Time Lag switches have only been available as air-operated push buttons and as they were only available in a plain white finish with an unsightly large white button plunger they were found to be unsuitable for many properties where something more stylish was a requirement.

When using any version of Time Lag Staircase switch you cannot use standard on/off light switches on the same circuit - all the other switches for the lights will need to be the same Time Lag Switches.

At Sockets and Switches we have two versions of the Time Lag Switch - Retrofit and Module.

Retrofit Time Lag Switches

We have introduced a Retrofit Staircase Time Lag Switch to our range. These decorative switches simply replace the old White air-operated push button type.

For simplicity of installation the Retrofit Time Lag models do not require a neutral and as such can be used as a straight replacement for your existing light switch.

The switch has a fully adjustable time delay from 1 minute up to 2 hours, to alter the delay you simple adjust the setting on the rear of the switch when installing. On use the user presses the push button on the switch to briefly switch the lights ON and then after your pre-set time has elapsed, the lights will switch OFF automatically.

You have a choice of a standard button switch or an illuminated version with a location light which remains lit until the switch is pressed to help find the switch in the dark. When pressed the location light goes off as the lights come on; once the time lag period has elapsed the location light then comes back on.

Important - never use a Retrofit Time Lag Staircase Switch that is not rated higher than the load applied to it – the maximum loads for the Retrofit switches are 1500w (240v) or 1000w (Fluorescent) or 500w (LED). The switches can also be used for Fans or Halide Lights up to 250w.

We recommend a 35mm deep wall box as these switches are approximately 29mm deep.

Module Switches - only available in certain styles

This version of the Time Lag Switch requires a module to be fitted into the circuit to work. You will require only one Staircase Time Lag Module per circuit and are usually located remotely and out of sight. This means you can have fully deccorative switches where the light is required and any number on the circuit and can be combine Staircase Time Lag Switches with Toggle Light Switches on the same plate if required.

The module has a fully adjustable time delay setting from 30 seconds up to 10 minutes that is pre-set on installation – this then enables the users to press the push button Staircase Time Lag Switch briefly to switch ON the lights then after the pre-set time has elapsed the lights will switch OFF automatically.

Important - never use a Staircase Time Lag Module that is not rated higher than the total load applied to it – the maximum loads for the module are 2300w (240v) or 1500w (12v) or 1000w (Fluorescent) or 460w (LED).

We recommend 25mm or 35mm deep wall boxes for mounting our button dimmer switches.

If you require any advice or assistance please call our sales team on 01926 289 289.

Customer Reviews For Hand Forged Hammered Black Time Lag Staircase Switch

No reviews yet - Be the first to Rate the Hand Forged Hammered Black Time Lag Staircase Switch

Other reviews for Hand Forged Sockets & Switches are

Average customer rating: 5 stars  10  reviews

      
24 January 2024 by Sinead McGowan, Ballybofey - Verified Customer

      
08 May 2021 by Jonti, Oxford - Verified Customer

      Quite Expensive But Worth It
01 April 2021 by Tom, Dorchester - Verified Customer

Not the cheapest light switches but they look so beautiful so worth every penny. The hammered dimpled finish makes the copper look distinctive from every direction. Only used in a small area but going to change over more sockets over time.

      Ideal For Bathroom
19 March 2021 by Jenny D, Cheltenham - Verified Customer

Just refitted our bathroom and this was one of the finishing touches.

      Ideal For Bathroom
19 March 2021 by Jenny D, Cheltenham - Verified Customer

We have just refitted our bathroom with traditional style basin, bath etc, and this is one of those finishing touches that just completes all our hard work.

      Wow
14 July 2020 by Pat Bunn, Dartmouth - Verified Customer

Wow worth every penny. Seriously good stuff.

      Delighted With My Purchase
03 March 2020 by Jarvis Smythe Interior Designs, London - Verified Customer

Very good quality and authentic looking product.

      High Quality
03 July 2019 by John Bailey, London - Verified Customer

High Quality items and very well made. I recommend these hand made switches.

      Very Well Made Items
04 March 2019 by Jackie Taylor, Kingston - Verified Customer

I found these very well made and the fronts are obviously hand-made to a very high standard. The electrical inserts made by Wandsworth are so good. They look splendid!

      Stunning Design - Highest Quality
26 February 2019 by Jackson George, Dawlish - Verified Customer

These hammered switches are very well put together and my electrician says they are the best quality accessories he has ever fitted. Very authentic looking and made with real solid copper.