Hand Forged Hammered Copper PIR Switch
Socket and Switch Sizes - Single 88mm x 88mm, Twin 148mm x 88mm
Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.
What is a PIR Switch?
Our PIR (Passive Infra Red) Sensor Switches are available in most finishes to complement the vast array of finishes and plate styles on offer at socketsandswitches.com. We offer two versions that cover a 5 metre detection range or a 10 metre detection range.
PIR (Passive Infra Red) Sensor Switches are designed for use in common areas where you might have regular visitors coming and going and the sensor allows for the lights or fans to switch on automatically then switch off again after a given period meaning that lights will never be left on when not required. These are most commonly used to switch lights on in an entrance hall or stairwell and the beauty of this is that they will switch themselves off after a pre-set time.
Previously PIR (Passive Infra Red) Sensor Switches have only been available in a plain white finish with an unsightly large plastic plate and they were found to be unsuitable for many properties where something more stylish was a requirement.
They incorporate a PIR quad sensor to detect movement of a warm body within their detection zone and a photocell to monitor the ambient light level. On detecting movement the PIR will switch the load on then if no more movement is detected within a certain pre-set time, then the PIR will switch off the load.
They have an adjustable time delay setting from 10 seconds up to 40 minutes that you pre-set on installation – the time delay can be reset or changed at any time by readjusting the concealed setting dials.
You can use these as a stand alone switch or link as many PIR (Passive Infra Red) Sensor Switches together as you like. You cannot use standard on/off switches on the same circuit and all other switch positions will also need to be PIR (Passive Infra Red) Sensor Switches or a Double Pole Switch as these PIR (Passive Infra Red) Sensor Switches require a Neutral.
Never use a PIR (Passive Infra Red) Sensor Switch that is not rated higher than the total load applied to it – the maximum loads are 1500w (240v) or 1500w (12v) or 500w (Fluorescent) or 500w (LED).
They will also switch on/off Fans to the maximum load of 250w.
We recommend a 35mm deep wall boxes for mounting our PIR (Passive Infra Red) Sensor Switches.
If you require any advice or assistance please call our sales team on 01926 289 289.
Customer Reviews For Hand Forged Hammered Copper PIR Switch
No reviews yet - Be the first to Rate the Hand Forged Hammered Copper PIR Switch
Other reviews for Hand Forged Sockets & Switches are
5 stars 10
reviews
24 January 2024 by Sinead McGowan, Ballybofey - Verified Customer
08 May 2021 by Jonti, Oxford - Verified Customer
Quite Expensive But Worth It
01 April 2021 by Tom, Dorchester - Verified Customer
Not the cheapest light switches but they look so beautiful so worth every penny. The hammered dimpled finish makes the copper look distinctive from every direction. Only used in a small area but going to change over more sockets over time.
Ideal For Bathroom
19 March 2021 by Jenny D, Cheltenham - Verified Customer
Just refitted our bathroom and this was one of the finishing touches.
Ideal For Bathroom
19 March 2021 by Jenny D, Cheltenham - Verified Customer
We have just refitted our bathroom with traditional style basin, bath etc, and this is one of those finishing touches that just completes all our hard work.
Wow
14 July 2020 by Pat Bunn, Dartmouth - Verified Customer
Wow worth every penny. Seriously good stuff.
Delighted With My Purchase
03 March 2020 by Jarvis Smythe Interior Designs, London - Verified Customer
Very good quality and authentic looking product.
High Quality
03 July 2019 by John Bailey, London - Verified Customer
High Quality items and very well made. I recommend these hand made switches.
Very Well Made Items
04 March 2019 by Jackie Taylor, Kingston - Verified Customer
I found these very well made and the fronts are obviously hand-made to a very high standard. The electrical inserts made by Wandsworth are so good. They look splendid!
Stunning Design - Highest Quality
26 February 2019 by Jackson George, Dawlish - Verified Customer
These hammered switches are very well put together and my electrician says they are the best quality accessories he has ever fitted. Very authentic looking and made with real solid copper.
PIR Switches are available in the following styles -
Antique Edge , Art Deco , Art Deco Classic , Art Deco Dual , Art Deco Screwless , Art Deco Supreme , Black , Burnished Flat , Classic , Classical , Classical Aged , Contemporary Screwless , Crystal Clear , Dorchester , Duo , Duo Premier , Duo Premier Plus , Edwardian Classic , Edwardian Elite , Edwardian Premier Plus , Elegance , Elegance Elite , Elite Flat , Elite Paintable , Elite Square Paintable , Executive , Executive Square , Farrow & Ball Colour Match , Flat , Flat Classic , Flat Matt , Flat Vintage , Flat Wood Veneer , Flatplate Supreme , Georgian , Georgian Flat , Georgian Premier , Georgian Premier Plus , Grandura , Hand Forged , Heritage Flat , Low Profile , Low Profile Rounded , Natural Elements , Palladian , Pure White , Regency Premier Plus , Regent , RetroTouch Crystal , Screwless Aged , Screwless Paintable , Screwless Square , Screwless Supreme , Seamless , Seamless Colour Match , Seamless Square , Ultra Square , Victorian , Victorian Premier , Victorian Premier Plus , Vogue & Warwick
