Crystal Black Glass with Chrome Trim Intelligent LED Dimmer
Socket and Switch Sizes - Single 86mm x 86mm, Twin 147mm x 86mm
These sockets and switches have an expected standard delivery time of between 2 to 4 working days.
What is a Intelligent LED Dimmer?
Our Intelligent LED Dimmer range takes some of the mystery out of choosing the correct dimmer. Not only designed to operate on ALL types of Dimmable LED lamps and strips, these dimmers can be changed to become leading edge dimmers adapting to the type of load put through them, operating standard incandescent lamps as well as mains halogen lamps and low voltage halogen lamps.
Important - non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.
For all types of lighting please exceed the minimum wattage load and stay below the maximum wattage for effective operation. In the case of halogen lamps and capsules the dimmers must be over-rated by at least 25%. GU10, G9 and GZ10 halogen lamps and capsules tend to arc in the latter part of their life. This is not dangerous in any way and is a characteristic of halogen lamps. This arcing creates an additional load on the dimmer and can overload the module resulting in excess heat and premature failure. The first indication of this happening is an increase in noise, often heard as a buzz from the dimmer switch. It is important to note that all quality branded halogen capsules incorporate a fused link to protect the circuit in case of a short within the lamp. Non-branded cheap generic halogen lamps do not have this function and should be avoided.
Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur.
On special request we can make up combined dimmers that incorporate intelligent LED dimmers and push light switches so the look of all the dimmers / switches match on the same plate if required.
We recommend 25mm deep wall boxes for mounting our LED dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges.
If you require any advice or assistance please call our sales team on 01926 289 289.
Customer Reviews For Crystal Black Glass with Chrome Trim Intelligent LED Dimmer
5 stars 1
review
Very Pleased
28 February 2020 by Jan Haarland, London - Verified Customer
Looking good - realised after calling Sockets and Switches that I had installed NON-Dimmable bulbs so it didn't work. I changed the bulbs and it now works perfectly. Thank you
Intelligent LED Dimmers are available in the following styles -
Antique Edge , Art Deco , Art Deco Classic , Art Deco Screwless , Art Deco Supreme , Black , Burnished Flat , Classic , Classical , Classical Aged , Contemporary Screwless , Crystal Clear , Dorchester , Duo Premier , Duo Premier Plus , Edwardian Classic , Edwardian Elite , Edwardian Premier Plus , Elegance Elite , Elite Flat , Elite Paintable , Elite Square Paintable , Executive , Executive Square , Farrow & Ball Colour Match , Flat , Flat Matt , Flat Vintage , Flat Wood Veneer , Flatplate Supreme , Georgian , Georgian Flat , Georgian Premier , Georgian Premier Plus , Grandura , Hand Forged , Heritage Flat , Jacobean Dark Oak , Jacobean Light Oak , Jacobean Medium Oak , Low Profile , Low Profile Rounded , Natural Elements , Palladian , Pure White , Regency Premier Plus , Regent , RetroTouch Crystal , Screwless Aged , Screwless Paintable , Screwless Square , Screwless Supreme , Seamless , Seamless Colour Match , Seamless Square , Ultra Square , Victorian , Victorian Premier , Victorian Premier Plus , Vogue & Warwick
