Regent Antique Brass LED Dimmer
Socket and Switch Sizes - Single 94mm x 94mm, Twin 154mm x 94mm
Important - These large size sockets and switches replace standard fittings using the normal screw spacing, so no special work required.
These sockets and switches have an expected standard delivery time of between 2 to 4 working days.
Notes
Part of the Large Size Socket and Switch Range - Single 94mm x 94mm, Twin 154mm x 94mm
See How To Program The Varilight V-Pro Dimmer.
What is a LED Dimmer?
Our LED Dimmers are specifically designed to operate on ALL types of DIMMABLE LED lamps and strips. These LED dimmers can be easily programmed to optimise LED performance by following the instructions provided with this product. The dimmers have a choice of modes to match your LEDs and the minimum brightness can changed to suit your room.
Important - non-dimmable LED lamps cannot be dimmed. Should you fit a dimmer to non-dimmable LED’s then damage to the dimmer, lamps or both will occur.
Mains voltage dimmable LED light bulbs can be dimmed using an ordinary resistive dimmer. LED lamps are an attractive proposition as they consume very low wattages and are very energy efficient. This can cause problems when choosing the correct dimmer.
If you have a few LED lamps to dim, then the total wattage will not be enough to load the dimmer. For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. This means that the dimmer will simply not work. In these circumstances a low load dimmer rated at 5 – 50w would be required.
Under normal circumstances, so long as the minimum load is exceeded, dimming mains voltage LED lamps is not an issue so long as the minimum load is observed.
Dimming low voltage LED lamps is also easily achieved by either dimming the driver on the primary (mains) side or on the secondary (low voltage) side. Of the two, primary side dimming is the more desirable and the easiest to achieve. The LED driver would need to be of a constant current type and dimmable.
Never mix lighting types through the same dimmer on the same circuit. For example if you have 3 halogen bulbs and 3 LED bulbs fitted in the same room on the same switch you cannot replace that switch with a dimmer unless you remove either the halogen lamps or the LEDs. If you were to fit a dimmer in these circumstances then damage to the dimmer, lamps or both will occur.
On special request we can make up combined dimmers that incorporate LED dimmers and Intelligent dimmers on the same plate if required.
We recommend 25mm deep wall boxes for mounting our LED dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges.
If you require any advice or assistance please call our sales team on 01926 289 289.
Customer Reviews For Regent Antique Brass LED Dimmer
No reviews yet - Be the first to Rate the Regent Antique Brass LED Dimmer
Other reviews for Regent Sockets & Switches are
5 stars 5
reviews
Good Service Good Product
27 May 2020 by Darrel James, Canterbury - Verified Customer
I bought this because of the size being bigger than normal. It worked well for me and looks good. Delivery was next day so no complaints.
Large Enough To Cover Unsightly Wallpaper Edges
23 January 2020 by Sarah Farmer, Bedfordshire - Verified Customer
Good solution to hide unsightly wallpaper edges that were exposed when my old brass switches were taken off. I put white plastic ones on but they are smaller than my old brass ones and as the paper was cut around my old ones the white ones left a gap - so grateful to find these bigger ones.
18 December 2019 by Alasdair Moore, G81 5nq - Verified Customer
Good Value For Money
24 May 2019 by James Toft, Doncaster - Verified Customer
I wanted slightly larger switches than normal and these fit the bill. Good value for money and they look great on my walls.
Bigger Switches The Perfect Solution
01 May 2019 by Jack Bristol, Wokingham - Verified Customer
These 94mm switches are well designed and the fact they are bigger than normal switches helped hide some unsightly decorating left behind when I removed the old switches. 10/10
LED Dimmers are available in the following styles -
Antique Edge , Art Deco , Art Deco Classic , Art Deco Screwless , Art Deco Supreme , Black , Burnished Flat , Classic , Classical , Classical Aged , Contemporary Screwless , Crystal Clear , Dorchester , Duo , Duo Premier , Duo Premier Plus , Edwardian Classic , Edwardian Elite , Edwardian Premier Plus , Elegance , Elegance Elite , Elite Flat , Elite Paintable , Elite Square Paintable , Executive , Executive Square , Farrow & Ball Colour Match , Flat , Flat Classic , Flat Matt , Flat Vintage , Flat Wood Veneer , Flatplate Supreme , Georgian , Georgian Flat , Georgian Premier , Georgian Premier Plus , Grandura , Hand Forged , Heritage Flat , Jacobean Dark Oak , Jacobean Light Oak , Jacobean Medium Oak , Low Profile , Low Profile Rounded , Natural Elements , Palladian , Pure White , Regency Premier Plus , Regent , RetroTouch Crystal , Screwless Aged , Screwless Paintable , Screwless Square , Screwless Supreme , Seamless , Seamless Colour Match , Seamless Square , Ultra Square , Victorian , Victorian Premier , Victorian Premier Plus , Vogue & Warwick
