Screwless Brushed Brass Touch Dimmer Secondary Control
This product is not currently available
Socket and Switch Sizes - Single 86mm x 86mm, Twin 147mm x 86mm
These sockets and switches have an expected standard delivery time of between 2 to 4 working days.
What is a Touch Dimmer Secondary Control?
Our Touch Dimmer ranges operate by simply touching the faceplate as opposed to pressing or turning the knob of a conventional dimmer switch. This has the advantage of being easier to use if you have problems with gripping a normal dimmer through arthritis or disability etc.
This range will dim standard incandescent lamps as well as mains halogen lamps up to a load of 500w or 250w respectively. They are only available for one way operation if used in conjunction with a light switch. If you require a 2 way touch dimmer you will need to purchase a Touch Dimmer (Slave) unit as well as a main touch dimmer unit.
If you require LED lamps to be dimmed please refer to our LED Dimmer section.
Touch dimmers are the most commonly used to dim incandescent and mains voltage halogen light bulbs and capsules. All dimmers are rated by wattage and touch dimmers are no exception. They are commonly available in 250w and 500w modules. It is important to note that they also have a minimum load requirement of 60w.
These wattages must always be adhered to and in the case of halogen lamps and capsules must be over-rated by at least 30%. GU10, G9 and GZ10 halogen lamps and capsules tend to arc in the latter part of their life. This is not dangerous in any way and is a characteristic of halogen lamps. This arcing creates an additional load on the dimmer and can overload the module resulting in excess heat and premature failure. The first indication of this happening is an increase in noise, often heard as a buzz from the dimmer switch.
It is important to note that all quality branded halogen capsules incorporate a fused link to protect the circuit in case of a short within the lamp. Non-branded cheap generic halogen lamps do not have this function and should be avoided.
Never use a dimmer module that is not rated higher than the total load applied to it.
We recommend 25mm deep wall boxes for mounting our touch dimmer switches or 35mm deep wall boxes for shallow or flat plate ranges. If you require any advice or assistance please call our sales team on 01926 289289.
If you require any advice or assistance please call our sales team on 01926 289 289.
