Executive Square Polished Stainless Steel Architrave Light Switches
This product is not currently available
Socket and Switch Sizes - Single 86mm x 86mm, Twin 146mm x 86mm
Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.
What are Architrave Light Switches?
Architrave Light Switches are generally used in areas where space is restricted. Often used in between 2 door frames or close to corners or obstructions where a standard switch simply couldn’t fit. The approximate size of 86mm x 32mm means that the architrave switch requires a specially designed wall box – these are available by request.
Light Switches are generally available to switch 1 way and/or 2 way circuits. All of our Light Switches are 2 way versions and the beauty of this is that they can be used on both 1 way and 2 way circuits thus eliminating the need to buy both types. A 2 way circuit refers to a lighting point that can be switched from 2 different places i.e. Hall and Landing, where you might have a switch at the bottom of the stairs and a further switch at the top of the stairs that both control the same lighting point.
If you should have more than 2 switching positions you will require one of the switches to be a intermediate switch.
Our light switches are available from a single switch (One Gang) or a 2 switch version (Two Gang). The word “gang” refers to the rocker switch – for example if you require a triple light switch it would be 3 Gang.
Our light switches have a load rating of either 10amp or 20amp and the terminals will accept up to 3 x 1.5mm Twin & Earth Cables.
If you require any advice or assistance please call our sales team on 01926 289 289.
If you require any advice or assistance please call our sales team on 01926 289 289.
Wiring Diagrams
See the wiring diagrams for One Way Light Switches and Two Way Light Switches.
