Disc Antique Brass Light Switch
This product is not currently available
Socket and Switch Sizes - Single 110mm x 110mm, Twin 170mm x 110mm
Please note ‐ These sockets and switches are individually handcrafted just for you which means The expected delivery time is 7 to 10 working days. This can be subject to change and is not guaranteed.
Notes
Single Plate 110 x 110mm
Double Plate 110 x 170mm
What is a Light Switch?
Light Switches are generally available to switch 1 way and/or 2 way circuits. All of our Light Switches are 2 way versions and the beauty of this is that they can be used on both 1 way and 2 way circuits thus eliminating the need to buy both types. A 2 way circuit refers to a lighting point that can be switched from 2 different places i.e. Hall and Landing, where you might have a switch at the bottom of the stairs and a further switch at the top of the stairs that both control the same lighting point.
If you should have more than 2 switching positions you will require one of the switches to be a intermediate switch.
Our light switches are available from a single switch (One Gang) up to as many as 10 switches (Ten Gang). The word ‘gang’ refers to the rocker switch - for example if you require a triple light switch it would be 3 Gang.
Our light switches have a load rating of either 10amp or 20amp and the terminals will accept up to 3 x 1.5mm Twin & Earth Cables.
We recommend 16mm deep wall boxes for mounting our switches or 25mm deep wall boxes for shallow or flat plate Switches.
If you require any advice or assistance please call our sales team on 01926 289 289.
Wiring Diagrams
See the wiring diagrams for One Way Light Switches and Two Way Light Switches.
